EZ-Lift ELM Series Lifting Magnets
Use the EZ-LIFT to move plate steel, block or round steel, and iron material
in your shop. Super-powerful "rare earth" neodymium iron boron magnet
requires no electricity. It’s perfect for loading or unloading most workpieces
including press molds, plastic molds, machined parts, etc.
• Rated for loads up to 4,400 lbs.
• Powerful magnet tested to hold 3.5 TIMES the rated load for maximum safety.
• Eliminates dangerous straps and slings.
• Fast, safe, efficient loading and unloading.
Model
Material
Maximum Rated Load
Minimum
Thickness
ELM-100
plate steel
220 lbs.
0.59"
ELM-300
plate steel
660 lbs.
0.98"
ELM-600
plate steel
1,320 lbs.
1.18"
ELM-1000
plate steel
2,200 lbs.
1.57"
ELM-2000
plate steel
4,400 lbs.
2.16"
Safety Factor: On all our lifting magnets there is a built-in
SAFETY FACTOR of 3.5 times the rated load. This means that the SAFETY FACTOR is 3.5 times the maximum rated load for each magnet.
Lever in “OFF” position.
Lever in the “ON” position. Note the pin safety lock is engaged
Operation
First place the magnet in contact with the piece to be lifted. Then,
simply move the lever to the “ON” position to engage the magnet.
Spring-loaded lock keeps magnet engaged until you release it.
